轉珠無人駕駛-PAD

About 轉珠無人駕駛-PAD Android App

!本程式需要ROOT!

!全新功能!
1)加入雙消(2顆消除)功能,全面支援新技能.
2)嫌打素材沉悶??可在設定中選取"自動開始下回合",全自動過關,真正無人駕駛!
3)可選全體或單體攻擊
4)限制COMBO數目


!!在購買前請一定要確定程式在您的機器上運作正常,否則請不要購買.購買後,恕不退款.!!
如要支持本程式,請給5星評就可以,請不要試用都不能運作都購買支持本程式,
本人沒有辦法保證所有機都如我的手機NOTE2一樣運作正常.

----------------------------------------------------------------------------
你是一個轉珠生手 怎麼轉都只有2~3combo 急需幫助?
轉珠自動導航-無人駕駛,自動幫你轉出最高COMBO!


======================
要注意的地方:
======================
*已更新程式全面支援不同機種,但如果你的機型在更新後轉珠還是有問題,請來信通知*
收到以下機種用戶通知有問題,
長江系列
請以上機種用戶暫時不要購買..留意便新..

除非你已經測試過可以在你的機器上正常運作..否則恕不退款..謝謝大家支持.

1)確定你的手機已經ROOT
本程式一定要ROOT機後才能發揮作用,否則不能自動轉珠...

2)確定手機的截圖檔存放位置.
先截圖,然後在相簿裏看看能不能找到,如果找得到,
就可以在本程序裏>截圖路徑設定中選那個檔案就可以了.

3)選擇正確的螢幕設定
因為ANDROID太多機種了,難以統一設定,所以請選正確的對應設定.
否則輕則會出現COMBO數不對,重則會出現解讀錯誤.
如果出現螢幕設定問題,可以在設定>校正螢幕中調校,
還是如果不行,請EMAIL我,我可以幫你看看.

==========程序的定位=============

幫助一些想玩但懶得轉的玩家...

準確度,平均達6COMBO(最低COMBO數,不計天降COMBO):
Combo 3~5: 10%
Combo 6~7:80%
Combo 8+ :10%

搜尋設定 說明
這是給系統的搜尋路線指示,每個色會有星星代表喜好.
1)減少星星為保留那個色的珠,增加那個色的珠.
2)選了連擊,則表示該色5連珠或以上(建議最多選2個)
3)請按事實去設定,如果你設的條件太高(如6色全連擊),程式會找不到合條件的路線,而令到COMBO數大減..
4)選了連擊..可以走的路線必定會比沒有連擊少,因此combo數也會一個連擊平均降低1combo左右.
5)如果你認為你的設定令到combo大減,建議你回復原本的定,之後再每項細調..直到滿意為止..

用戶回報可用機種
Samsung: Note2,Galaxy Note 10.1,Galaxy S3, Note3,Galaxy S4, Mega
小米:2s
HTC:HTC One,Butterfly
Sony:Xperia SL,Xperia TX

有問題的機種..
LG 系列,
HTC HTC Desire VC
Sharp 630E
infocus

不斷更新中...

===========================================
使用方法:
1)請確定你的機器已ROOT.否則不能運行本程式.

2)請確保已選正確的對應遊戲

3)按 "開始"

4)開啟遊戲

5)到戰門畫面時

按"執行"(右上第一個鍵,)程式會自動轉珠不等待指示.

按"截圖"(右上第二個鍵),程式會顯示路線預覽,按"執行"來自動轉珠.

按左右鍵(右上第三,四個鍵)查看路線結果.

按"設定"(右上第五個鍵)進入設定畫面.


另外自動刪除截圖見到"損壞檔"這是正常的,
因為"損壞檔"是假像,其實是已刪除,在程式退出後,程式自動清理他們,請不用擔心.

請注意:
1)如果您有使用drop box或cloud 相簿同步功能，請先停止相簿同步，否則會嚴重影響執行速度。
2)程式需要比較大的記憶體去執行運算,因此,盡可能在執行前關掉不必要的程序.
3)如果您有安裝記憶體管理軟件,請把本程式設為不可停止的程序,不然一按開始就會被停止了(跳出現像).
4)如出現"偵測到不相容軟件",為求保障程式安全,請移除"Freedom","XPrivacy",否則程式會拒絕執行..

=========================================
執行問題解答:

“不能解讀的畫面”
1）請確定有關遊戲是程序設定中對應的遊戲。
2）請關閉省電模式
3) 進入[對應遊戲] 選擇 AUTO-[遊戲名],自動偵測設螢幕定.
4) 再試一次

如果還是不能解讀，請寄我
/SDCard/GemHelper/err.log
和轉珠畫面
寄到
[email protected]
我會盡快處理.

"截圖檔案夾不存在錯誤"
如果按開始後出現"截圖檔案夾不存在錯誤",
請拍一張截圖後再開始,如果還是不行,
就請確定系統設定中,
截圖檔案路徑設定位是否正確

"請確定已取得ROOT權限"
如果你看到這個訊息,請確定你已經ROOT機,
否則請回報你沒有ROOT機但看得到截圖鍵..

如果你確定已ROOT機,請把ROOT權限給程序,
它才能正確地自動截圖..

"偵測到不相容軟件"
為求保障程式安全,請移除"Freedom",否則程式會拒絕執行..
而XPrivacy 則不能限制本程式,否則會出現"不相容軟件"而拒絕執行.

一直顯示"連線中"
1)請確定已更新至最新版本
2)請確定網絡正常.

已購買但顯示"己過期"或者 "試用版"
出現這個問題是在更新後或者重新安裝第一次啟動程式..
這是GOOGLE 認證程序出現的一些延遲導至的問題,
請先確保你的網路正常,
然後退出程式,再次進入程式就可以解決問題.

=========================================
免責聲明
本程序只是基於本人的機器進行測試調試,並不能保證所有機器都能和本人的測試結果一致.
如因本程式引起的任何損失或者任何法律責任,請用者自付.

在購買前請一定要確定程式在您的機器上運作正常,否則請不要購買.
購買後,恕不退款. ! The program requires ROOT!

! New features!
1) adding double elimination (2 elimination) function, fully support the new skills.
2) material too boring to play?? Can select "auto start the next round", automatic clearance, unmanned in real settings!
3) Optional single attack of all or
4) limit the number of COMBO


!! Before buying, please be sure to determine the operation of applications on your machine properly, otherwise please do not buy. After purchase, without refund.!!
To support this program, please give 5 star rating on it, please do not try to buy support can not operate all of the programs
I have no way to guarantee that all machines are the same as my phone NOTE2 functioning properly.

-------------------------------------------------- --------------------------
You are a novice how turn Balls are only 2 ~ 3combo need help?
Balls automatic navigation - unmanned, automated help you turn out the highest COMBO!


======================
To pay attention to:
======================
* Updated program fully supports different models, but if your machine after updating Balls still have problems, please email notification *
Users receive the following models notice a problem,
Yangtze Series
Please above models user attention will temporarily not to buy .. new ..

Unless you have been tested can work properly on your machine .. otherwise non-refundable .. thank you for support.

1) Make sure your phone is already ROOT
This program must be ROOT machine in order to play the role, or can not automatically turn beads ...

2) determine the phone screenshot file storage location.
First shots, then take a look at the gallery where I can find, if find,
In this program you can> screenshot file path settings that can be selected.

3) Select the correct screen settings
Because the aircraft ANDROID too difficult unified setting, so please choose the correct corresponding settings.
Otherwise, there will COMBO ranging from a few wrong, wrong interpretation of re-appears.
If the screen is set problems, you can set the> calibration screen calibration,
Or if not, please EMAIL me, I can help you look.

Positioning ========== program =============

Help some players want to play but do not bother to turn ...

Accuracy, an average of 6COMBO (lowest number COMBO, excluding heaven COMBO):
Combo 3 ~ 5: 10%
Combo 6 ~ 7:80%
Combo 8 +: 10%

Search Settings Help
This is an indication to the search route system, have stars on behalf of each color preferences.
1) Reduce the stars for that color bead retention, increase the color beads.
2) Select a batter, it means that the color 5 Pente or more (up to elect two)
3) Press to set the facts, if you set the conditions are too high (such as 6-color full batter), the program can not find the conditions of the route together, and so the number of greatly reduced .. COMBO
4) Select a batter .. you can go the route must be no less than the batter, so the number will be a combo combo average reduction of about 1combo.
5) If you think your settings to make the combo greatly reduced, I suggest you restore the original setting, and then after each fine .. until satisfied ..

User rewards available models
Samsung: Note2, Galaxy Note 10.1, Galaxy S3, Note3, Galaxy S4, Mega
Millet: 2s
HTC: HTC One, Butterfly
Sony: Xperia SL, Xperia TX

The model in question ..
LG series,
HTC HTC Desire VC
Sharp 630E
infocus

Constantly updated ...

===========================================
Usage:
1) Make sure your machine has ROOT. Otherwise can not run this program.

2) Make sure that the correct corresponding selected games

3) Press the "Start"

4) Open the game

5) When the screen door to war

  Press the "Run" (top right the first key,) the program will automatically turn beads do not wait instructions.

  Press the "screenshot" (top right second key), the program will display the route preview, click "Run" to automatically turn beads.

  Left-right (upper right third, four key) to view the route results.

  Click "Settings" (top right fifth key) to enter the setup screen.


In addition to automatically delete screenshots to see the "corrupted file" This is normal,
Because "damaged file" is a false image, in fact, have been removed, after exiting the program, the program automatically clean them, do not worry.

Please note:
1) If you are using a drop box or cloud synchronization album, please stop albums sync, otherwise it will seriously affect the execution speed.
2) The program requires a relatively large memory to perform an operation, so as to turn off unnecessary programs before execution.
3) If you have installed the memory management software, the program set the program can not be stopped, otherwise one will be stopped by the start (jump appear like).
4) If a "detected incompatible software," for the sake of protection of the safety program, remove the "Freedom", "XPrivacy", otherwise the program will refuse to execute ..

=========================================
Execution questions:

"Can not interpret the picture"
1) Make sure about the game is programmed in the corresponding game.
2) Turn off the power saving mode
3) enter [the corresponding game] to select AUTO-[game name], set to automatically detect settings screen.
4) Try again

If you still can not interpret, please send me
/ SDCard / GemHelper / err.log
And Balls picture
Sent
[email protected]
I will deal with as soon as possible.

"Screenshot folder does not exist error"
If you press the start of a "screenshot folder does not exist error"
Please take a screenshot before you start, or if not,
Make sure the settings on the system,
Screenshot file path setting is correct and

"Make sure ROOT permissions have been obtained."
If you see this message, make sure you have ROOT machine,
Otherwise, please return ROOT machine but you do not see screenshot key ..

If you are sure ROOT machines, please ROOT privileges to the program,
It can automatically screenshot correctly ..

"Incompatible software detected"
In order to protect the safety program, remove the "Freedom", otherwise the program will refuse to execute ..
The XPrivacy can not restrict the program, there would be "incompatible software" and rejected.

Always show "Connection" on
1) Make sure to update to the latest version
2) Make sure the network is normal.

Have purchased it displays "has expired" or "Trial Version"
The problem occurs after you update or reinstall the program first started ..
This is a guide to some delay problems arise GOOGLE certification process,
Please make sure your network is normal,
Then exit the program, enter the program again can solve the problem.

=========================================
Disclaimer
This procedure is based on my test machine debugging, and can not guarantee that all machines and I test results were consistent.
As a result of this program any loss arising or any legal responsibility, please user pays.

Before buying, please be sure to determine the program works properly on your machine, otherwise please do not buy.
After purchase, non-refundable.