What's New
IMPROVED
• The alarm triggered through volume buttons works normally again with Android >= 13 as if worked with Android < 12.
• The pre-alarm dialog (the screen that counts down before an alarm is triggered) has been improved.
• Libraries used internally have been updated.
PLANNED
• Introduction of a new SMS command:
#1234#BLINK#
The LED and the cell phone screen will blink for one minute.
• Continuous motion monitoring and if possible also fall monitoring with the help of the Mi Fit band
About AutoSOS: Automatic SOS Alarms Android App
BASIC FUNCTIONALITY
• Alarming in case of emergency (via phone call and SMS with a link to Google Maps)
- No Internet required, i.e. no need to purchase data packages for alerting
(neither at home nor abroad).
- Location of the mobile phone even without ➀ GPS (less accurate)
• Speed dial and alarming from the lock screen
• Alerting of incoming alarm SMS, even in silent mode
• Eases finding the mobile phone in close proximity, by making it ring through an SMS command, even in silent mode
• Facilitate the location of the mobile phone in case of theft by reporting its current position:
- in response to a SMS command
- when the SIM card is changed ➁
• AutoSOS alerts when alarm SMS is received from burglar alarm systems, even if the mobile phone is muted
➀ For this purpose AutoSOS must also be installed on the alarm receiver side.
Please note: The alarm emitter must have "Location" enabled under Android. This is the only way for apps to get access to "location sources" (GPS, cell phone masts, and WLAN). Cell phone masts and WLAN are used by AutoSOS for location if GPS reception is missing. The "Android location" is mandatory, not only for AutoSOS but for all apps that offer position finding. (See: Location / GPS And Battery Consumption With Android)
➁ only works with Android versions < 10
RAISING ALARMS
The alarm can be raised:
• by clicking on the SOS button
• by pulling the earphone plug (Hint: Cut the cord of an old earphone and make a loop or knot)
• by the absence of significant motion
• by holding or clicking one of the volume buttons several times
• by pressing the power button several times
• by pressing a Flic button ➂ (to be bought separately from www.flic.io)
• by using Bluetooth remote controls
• when the battery is low of charge
➂ Both new Flic2 and older Flic buttons are supported.
DETAILS
See AutoSOS - The Android Alarming App: https://www.autosos.org/p/autosos.html
PRIVACY POLICY
See AutoSOS - PrivacyPolicy: https://www.autosos.org/p/autosos.html#PrivacyPolicy
[SDL: 000000146641]
Other Information:
Download
This version of AutoSOS Android App comes with one universal variant which will work on all the Android devices.
All Versions
If you are looking to download other versions of AutoSOS Android App, We have 10 versions in our database. Please select one of them below to download.
