CCNA Labs Routing

About CCNA Labs Routing Android App

CCNA Routing Labs premuim version provide 73 routing Labs , include CCNA / CCNP lesson routing protocol : EIGRP / OSPF / RIP / BGP , and IP service : DHCP /NAT /ACL/ VRRP / HSRP / IP SLA / GLBP / PPP / NTP/ Tacacs+ / Radius / Telnet / SSH / L2 , L3 EtherChannel for PAgP and LACP , the following is a detailed LAB items :

(1) IP Service 1 :
Dynamic NAT
Static NAT
PAT (port address translation)
Extended ACL
Standard ACL
Name ACL
Time ACL
IPv6 ACL(1)
IPv6 ACL(2)

(2)IP Service 2 :
VRRP (track on serial)
HSRP (track on serial)
VRRP/IP SLA (track on ethernet)
HSRP/IP SLA (track on ethernet)
GLBP(Gateway Load Balance Protocol)
DHCP server
DHCP relay
Enable NAT on DHCP router
DHCPv6 auto config

(3)IP Service 3 :
DHCPv6 stateless
DHCPv6 stateful
PPP CHAP authentication
PPP PAP authentication
PPP multilink
GRE tunnel
NTP
NTP authentication

(4)IP Routing 1:
EIGRP manual summary
EIGRP unequal cost load balance
EIGRP passive interface
EIGRPv6
EIGRP authentication
EIGRPv6 authentication
EIGRP redistribution OSPF Route
EIGRP redistribution RIP Route
EIGRP redistribution static Route

(5)IP Routing 2:
OSPF normal area
OSPF stub area
OSPF totally stub area
OSPF NSSA area
OSPF totally NSSA area
OSPF virtual link
OSPFv3 (OSPF for IPv6)
OSPF authentication (by area)
OSPF authentication (by interface)

(6)IP Routing 3:
OSPF route summary on ABR
OSPF route summary on ASBR
OSPF redistribution RIP route
OSPF redistribution static route
RIP route filter
OSPFv3 virtual link
Policy base route
RIPng
Inter VLAN Routing

(7)IP Routing 4:
BGP authentication
BGP local preference (1) : config global
BGP local preference (2) : config network prefix
BGP MED
BGP neighbor
BGP neighbor use loopback interface
BGP summary address

(8)Switch 1:
Tacacs+ on switch
Tacacs+ on router
Radius on switch
Radius on router
Reset router
Reset switch
Config Telnet
Config SSH
Restricted IP access

(9)Switch 2:
L2 EtherChannel PAgP
L3 EtherChannel PAgP
L2 EtherChannel LACP
L3 EtherChannel LACP