Chronos Connacht

About Chronos Connacht Android App

*** \_\_\_\_\_\_\_\_\_ Requires WatchMaker.app \_\_\_\_\_\_\_\_\_***


Watch Face Pack for Watchmaker (interactive)
You need Watchmaker 3.7 or higher to install these faces.
https://goo.gl/ekbzJ1

CHRONOS Connacht
The Connacht’s main face shows hours, minutes, day and date and battery level.
Tap at 01:00 to change to stopwatch mode. 2 starts and 4 resets the stopwatch.
Tap at 05:00 to change to the black face and at 06:00 to update the temperature.

CHRONOS Ball
The Ball’s main face displays the hours, minutes and seconds. Time zone 1 is displayed by the blue hand. The date sliders can be seen at 03:00. The battery levels are shown on the second dial.
Tap at 01:00 for a digital display that includes moon phase, sunrise and sunset, digital time, date, location with current and forecast high temperatures, battery levels and digital stopwatch.
Tapping at 01:00 again changes the display to analogue stopwatch mode. 2 starts and 4 resets the stopwatch.
While the stopwatch is shown the battery levels are also on display.
Tap at 05:00 to activate night mode and 06:00 to update the weather.

CHRONOS Leuad
The Leuad’s face shows the hours and minutes, the day and the date.
The digital display below the bezel shows the date and time.
The dial at 06:00 shows the moon phase. The dial at 12:00 shows AM/PM with a) the sun/moon dial and b) the hand that rotates through 180º to display the current hour. This hand is green between 18:00 and 06:00 and white between 06:00 and 18:00.
Tap at 01:00 to change the display to stopwatch mode, indicated by the icon at 03:00. 2 starts and 4 resets the stopwatch. Tap at 01:00 again to display the temperature, again indicated by the icon at 03:00. Tap again for the battery levels and finally for time zone 1. Note that the AM/PM display also changes to time zone 1.
Tap at 05:00 to activate night mode and 06:00 to update the weather.