Classic DIY Leather Foldover Clutch

About Classic DIY Leather Foldover Clutch Android App

Have you ever heard the term "Fast Fashion"?. This tutorial is for a DIY Leather Fold Over Clutch, its a quick project you can make in a few hours. Enclosed you will find the step-by-step directions, also there is a link to a video that will help and guide you along. Once you get the hang of it, it's a fairly easy project for a beginner or someone with a bit of sewing experience.

Step 1: TOOLS + MATERIALS
TOOLS
- Scissors (for cutting fabric)
- X-acto Knife (for cutting paper)
- Pencil
- Erase
- Sharpie Marker, Black
- Oak tag Heavy Paper
- 18” Clear Plastic Ruler
- Metal Ruler, with cork back
- Rotary Cutter
- Self-Healing Cutting Mat

MATERIALS
- Leather 13” x 26”
- Lining ¼” yard
- Zipper 11 ½”
- 69-Bonded Nylon
- Cotton Commercial
- Ultra Hold Heat Bond

OPTIONAL
- Scratch Awl
- Bone Folder
- Pliers
- Glovers Sewing Needles
- Paints

Step 2: DRAFTING THE PATTERN
- Plot out these measurements onto paper, right side of paper should face UP.
- Right side of oaktag paper is Natural color.
- Right side of pattern paper is side with letters or markings.
- Right side of manila folder is arbitrary; pick a side and mark as top.

Step 3: CUT OUT THE PIECES
CUT OUTSIDE LEATHER - Trace your pieces onto your leather from the backside of the skin and cut.
CUT INSIDE LINING (optional) - Trace and cut lining, for this step you can use ONE pattern as long as you are cutting (2) layers of fabric lining.

Step 4: SEWING - OUTSIDE LEATHER
ZIPPER
- Make sure your zipper is the correct length, cut if needed.
- Sew on the zipper END tab
- Set the zipper to FRONT and BACK sections, top stitch, careful to catch the zipper tape.
- Slide zipper open to halfway point, you need to do this before sewing the sides and bottom, leave enough space for your hand to reach in.

SEWING FRONT AND BACKS
- Fold in half so that RIGHT sides face each other, match sides and bottom, secure with binder clips to hold.
- Sew on all THREE SIDES along the seam allowance, trim, clip and notch corners.
- Now turn INSIDE out.

Step 5: SEWING - LINING
Apply the Heat and Bond to top edges of FABRIC on both sides. Follow manufactures directions. Do not remove tape until you are ready to drop in the lining.

for further information and detail tutorial, download this now and grab what you want.
please enjoy this Classic DIY Leather Foldover Clutch Tutorial and give us any feedback.