DEMO TRUEscience - pH ION DO

About DEMO TRUEscience - pH ION DO Android App

DEMO VERSION - THIS IS A DEMONSTRATION VERSION TO ALLOW YOU TO TEST THE FUNCTIONALITY WITHOUT HAVING TO BUY A CAP. DOWNLOAD THE NON DEMO VERSION FOR ACTUAL USE

TRUEscience combines all the functions of a highly-specified laboratory meter into an affordable package, using an Android device and S7 electrodes.

To use this app you need one or more TRUEscience Smart caps with appropriate sensor electrode attached.

By using Bluetooth Smart technology, the TRUEscience smart cap connects wirelessly to your Android tablet and measures up to any 6 combinations of the following parameters simultaneously
- pH
- Redox
- Dissolved Oxygen
- Ion Selective Electrodes

Measurements are displayed on a single or multiple meter screen. The smart cap is battery powered and can run for up to 18 months on a single battery, or log for 3 months continuously.

TRUEscience features:
- Measure pH from 1-14 with a resolution of 0.01 using automatic temperature compensation.

- Measure Redox values with a resolution of 0.1mV in standard or relative mode

- Measure Dissolved Oxygen from 0-200% with a resolution of 0.1% using atmospheric pressure adjustment and automatic temperature compensation

- Ion Selective Electrode measurement of Ammonium, Barium,Bromide, Calcium, Carbonate, Chloride, Cupric, Fluoride, Iodide, Nitrate, Nitrite, Potassium, Silver, Sodium, Water Hardness to 0.1mV or 0.01mg/l

- Multiple meter support: choose between single meter screens and view up to 6 meters showing parameters of your choice from additional caps on a single screen.

- Measure anywhere: portable with a range of up to 50 meters from tablet or phone to probe.

- Data-logging: choose your start/end date, how often to log your data, save your data as CSV to the cloud storage of your choice, or send it over email. The Smart cap will continue to log up to 10,000 data points even when your tablet/phone is off or out of range.

- Open electrode system: choose a TRUEscience electrode or any standard pH, Redox or ISE electrode with an S7 screw in connector. Note: Dissolved Oxygen probes are specific

- Traceability: scan the QR code of calibration solutions to easily store and track batch number and expiry dates. You can customise or add your own expiry date on each item so the app will notify you to restock as per your laboratory’s Good Lab Practice (GLP). Access MSDS and Certificate of analysis via your app for TRUEscience solutions.

- Full calibration suite: View your calibration history and see who carried out the work.
>pH/ISE - the app supports 2 to 5-point calibration. You can also perform a single point QC check to make sure you are still in calibration.
>Dissolved Oxygen - you can perform a single point calibration with air or a two point using air and a zero oxygen standard

-Enriched data: store readings, photos and GPS location tags as one job to organise your work. Save these readings as a CSV to the cloud storage of your choice, or send it over email.

- Jobs lists: create a jobs list for each type of product/sample you test and keep results collated together by date.

- Alarms: set reading and temperature alarms on your meter, and additionally have it send an alert to your email address if required

- Accounts: Create individual users to help the laboratory manager keep track of who has performed calibrations or stored data.

The app is available for all post-JellyBean (4.3) tablets and is optimised for phones and tablets.

The ISE and Dissolved oxygen functionality is currently in BETA test phase but has been released in its current form for feedback from the user community as well as the Beta test group. Please email any suggestions to [email protected]

Purchase your equipment at www.truescience.co.uk/store/c1/Featured_Products.html

THIS IS A DEMONSTRATION VERSION TO ALLOW YOU TO TEST THE FUNCTIONALITY WITHOUT HAVING TO BUY A CAP. DOWNLOAD THE NON DEMO VERSION FOR ACTUAL USE