Easy DIY Zipper Jeans

About Easy DIY Zipper Jeans Android App

These heels (which I love) made a rare appearance for photos because we are normally in one of our 57 pairs of flats. And we hate when our jeans bunch up at the ankles. If your are 5’3″ or under, we know you know what I’m talking about. Yes, you could get them tailored but isn’t a zipper way more fun?

What you’ll need:

A pair of jeans (these are the ones I used)
2 5-inch zippers
Fabric fuse tape
Seam ripper

- First lay out the zipper on the outside seam of the pants. The end of the zipper should be at the very bottom of the jeans. Then make a mark at the top end of the zipper so you know how far to rip the seam.

- Then rip away! But don’t get too carried away – as you get close to the mark check the fit of the zipper.

- Apply the tape to both sides of the top of the zipper. One thing I learned is that you want to cut off the extra tape width if its wider than the zipper. So trim any overhang before you peel off the top white part.

- Carefully attach the zipper with the tape to both pant legs.

- If you accidentally rip the seams too high (like I did on one side) stick a bit more of the tape at the top of the zipper to hold it together.

Want to know more ?
Download this application now and get what you want here. worth to try and you will like it.
simply share through any social media platforms. thank you for downloading. please enjoy and give us any feedback.