PiScope

About PiScope Android App

** Note : This app requires PiScope Hardware unit **

The main Objective of the project is to decrease the complexity of the
apparatus required for analyzing the signals.

PiScope is a type of signal analyzer, designed by students, considering
various aspects and hurdles in their engineering lives. It is basically an extension of
Digital Oscilloscope. It is designed considering,
 Portability
 Economy
 Reusability
 Size
 Flexibility



Modes


1. Ethernet Mode


a. In ethernet mode, the raspberry pi is connected to a LAN network via a Router
b. Pi is assigned a static IP "192.168.0.99" (For Router Only)
c. Power on Raspberry Pi.
d. Open your browser and type 192.168.0.99, press enter.
e. You should see the PiScope website, if not, check the steps or contact the Developer.


2. HotSpot Mode


a. In HotSpot mode, the raspberry pi is connected to a Mobile device via the device's HotSpot Configuration
b. Wifi Hotspot Configuration: (Create using the following credentials)
*HotSpot SSID (name): PiScope
*HotSpot Key_Mgmt : WPA (WPA1)
*HotSpot password : 9738134205
c. Pi is assigned to a static IP "192.168.43.51" (*Usually)
d. Power on Raspberry Pi.
e. Open your browser and type IP, press enter.
f. You should see the PiScope website, if not continue the guide.
g. Download WiFi hotspot Manager from Playstore.
h. In clients tab , copy the IP Address and repeat from step e