Pretty DIY Leather Bow Belt

About Pretty DIY Leather Bow Belt Android App

here we want to share a project for a leather and bow belt. The project requires few supplies, a sewing machine, and simple sewing skills. Now lets get started.

What you need:
• A strip of thin, pliable leather, suede or other that will be easy to sew through
• Fabric of your choice
• Thread
• Good scissors

First cut your leather to the width and length you want your belt to be.

Now you will make two fabric “ribbons” that you will attach to each end of your leather strip that will create the bow of the belt.

Lay your fabric out so that you can cut the length of your ribbon. Measure the width of your leather and fold the edge of the fabric over to the width of the leather plus your seam allowance and cut to the correct length.

Iron your two pieces of fabric in half length-wise so that the right side of the fabric is facing in.

make one end of each piece of fabric and fold a corner up to touch the other edge of fabric like you are making a square out of a piece of paper. Press the fold of the fabric with your finger to make a crease along which to cut. And cut.

Start sewing on the folded side of the ribbon at the bottom end with the slant. Sew up the slant, turn, and continue to sew up the complete length of the fabric. Stop when you get to the small end leaving this open.

Turn the tubes right side out, gently pointing out the tip of the slant, I used a dull pencil. Now iron the fabric so you end up with a long, smooth ribbon.

Before you attach the ribbons to the leather, take raw ends and turn them inside about a quarter to half an inch and sew along the edge.

The last step! Its time to attach the ribbon to the leather.

for further information and detail tutorial, download this now and grab what you want.
please enjoy this Pretty DIY Leather Bow Belt tutorial and give us any feedback.