Radioactivity-Meter

About Radioactivity-Meter Android App

Use your smartphone as a Geiger counter to measure the radioactive radiation in your environment. The app uses the noise induced by the radioactive radiation in the smartphone's hardware to detect and quantify the radioactivity.

The most important part for the detection of the radioactivity is the camera chip of the smartphone. During the measument absolutely no incident light is allowed for the camera. Therefore the camera lens must be sealed e.g. by a black insulating tape. Of course you can keep the lens shut by your finger, but sometimes a little light shines through the fingers. In this case use at least additionally a cloth to shut the lens.

First calibrate the radioactivity-meter for your smartphone-hardware:
a) Fix the zero point where no radioactivity is caught by the smartphone. The zero point must be fixed at the lowest temperature of all future measurements.
b) Measure the radioactivity at a place, where the current radioactivity is known and assign this known gauge value and its unit to the value, measured by your smartphone to establish a relation between the internal hardware-dependent values of the smartphone and the real absolute quantity of radioactivity. The more exact the calibration and the higher the gauge value, the better the measurement results. From then on your radioactivity-meter is able to indicate the current radioactivity.

Due to the different hardware of the various smartphones we cannot ensure, that Radioactivity-Meter works on all smartphones with sufficient accuracy.

Since Radioactivity-Meter uses statistical algorithms to calculate the stochastic noise processes, the measuring situations should be always as similar as possible to avoid deviations of the metered values: same ambient temperature (without the zero point fixing), same up time of the smartphone, same method for sealing the camera lens etc. For this reason only single measurements are possible, no continuous measurements.

That way you can use your smartphone to determine at least the tendency for the changes of the radioactivity radiation.

NO WARRANTIES
SPITCONSULT expressly disclaims any warranty for its software products. The software products are provided 'As Is' without any express or implied warranty of any kind, including but not limited to any warranties of merchantability, noninfringement, or fitness of a particular purpose. SPITCONSULT does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the software products. SPITCONSULT makes no warranties respecting any harm that may be caused by the transmission of a computer virus, worm, time bomb, logic bomb, or other such computer program. SPITCONSULT further expressly disclaims any warranty or representation to Authorized Users or to any third party.

LIMITATION OF LIABILITY
In no event shall SPITCONSULT be liable for any damages (including, without limitation, personal injury, lost profits, business interruption, or lost information) rising out of 'Authorized Users' use of or inability to use the software products, even if SPITCONSULT has been advised of the possibility of such damages. In no event will SPITCONSULT be liable for loss of data or for indirect, special, incidental, consequential (including lost profit), or other damages based in contract, tort or otherwise. SPITCONSULT shall have no liability with respect to the content of the software products or any part thereof, including but not limited to errors or omissions contained therein, libel, infringements of rights of publicity, privacy, trademark rights, business interruption, personal injury, loss of privacy, moral rights or the disclosure of confidential information.