RGBDriver

About RGBDriver Android App

Welcome to RGBDriver!
This app is aimed to control your RGBDriver directly from your Android phone.
RGBDriver is a dedicated electronic device controlled by a powerful microcontroller. The device is controllable via Wi-Fi on Android.
After installation and setup, you can use your mobile phone or tablet to control the intensity and color of all leds connected to the device. The remote control distance can reach more than 50 meters indoor and more than 100 meters outdoor.
The application supports multiple devices. You can manage an illimited number of RGBDrivers each being assigned with its own SSID. You can drive 1 strip in the living room, another in the garden for example.

Devices are available for sale at www.rgbdriver.com
Android 4.1.2 minimum or higher is required.
Note this app is not available on IOS

Here below an overview of all features:

The app will scan automatically at startup all RGBdrivers in its range. You choose first to which RGBdriver you want to connect to and then the app shows you the main screen with:

The menu zone
-----------------------
On the right upper side of the screen (Android Navigation Bar), you find the Android menu icon. Once clicked, it displays the RGBDriver Menu:
- RGBDriver config: it opens the configuration screen, from the screen you can associate a given SSID a friendly name, useful when you have to configure several RGBdrivers. You can also modify a name given previously.
- Delete RGBdriver config: this opens a dialog window that allows to delete all previously configured RGBdrivers.
- DG7 On/off: toggles the RGBdriver GPIO Extension module, (needs to be purchased separately)
- PSE On/Off: toggles the RGBdriver Psychedelic module (needs to be purchased separately)
- Version: displays the software version number

The information zone
-------------------------------
It displays the WIFI SSID and connection status: "not connected", "connecting" and “connected".

The RGB control zone
--------------------------------

Here you have 5 square buttons:
- On/Off: turn the RGBStrip on or off
- Blink: turn on the blinking mode, whatever the color activated, the RGBstrip will be blinking
- Random: turn on the random mode, the RGBDriver will randomly create a new color each 2 seconds and assign it to the RGBStrip, transition between colors is gradual (fading).
- Strob: turn on the Stroboscope mode, the RGBdriver will create a make blinking the whole RGBstrip with a white light. The blinking speed is controlled by and additional cursor displayed on the app screen.
- Flash: the flash mode displays alternatively in an infinite loop: Red, Green, Blue colors
Then below, you find also 3 cursors that allow you to modify the level of Red, Green or Blue of the RGBStrip. With these cursors you can accurately modify each of the 3 colors of the Strip.

RGB keyboard zone
-------------------------------

And finally, you find the RGB keyboard zone: Here you have 10 predefined colors that you can activate on the Strip by pressing the adequate button on the keyboard.