RMU1ER Config

About RMU1ER Config Android App

*** Requires a corTalk® RMU1PGM-BT and RMU1ER to use. ***
Contact us at '[email protected]' to purchase.

Old RMU1PGM programmers have a white cable, the new Bluetooth/USB programmers have a black cable.

This app is for configuring the corTalk® RMU1ER (Remote Monitoring Unit 1 Electrical Resistance) with the new RMU1 Bluetooth Programming cable. The cable functions as a complete RMU1ER programming interface but only requires the Bluetooth connection of your phone and a USB power source.

The RMU1ER is used to monitor an Electrical Resistance probe of almost any time (Tube, Wire, Cylinder, Flush, Spiral or Strip). This app allows access to diagnostic information on the RMU1 and allows setting up the configuration to meet the customer's needs.

The app allows full configuration of the RMU1 including
- probe type
- probe thickness
- limits
- slot scaling and offset
- location

Other features include the
- viewing of readings and their limits
- detailed status screen for troubleshooting
- integrated manual

The RMU1PGM BT interface is always in a Bluetooth pairing mode and requires a pairing code entered on the app. The pairing code (default=123456) can be changed with the app. Once paired, the Android device can reconnect without needing to re-enter the code.