SOYAL APP (AR-727CM)

About SOYAL APP (AR-727CM) Android App

Advantages
◎ Remote Controller Setting
◎ Remote Door Open
◎ Check Event Log
◎ Edit Access User
◎ User-Friendly Touch Operation
◎ Changeable Font Size
◎ Compatible with 701Software
Basic Function- SP-200-B (Free)
1.Add / Delete the user
Add->Card ID: Add the user by input 5-digit site code and 5 digit card code
Suspend->Addr: Suspend the user by input 5-digit user address stored in device
Password: Set up the access password for individual user
Access Mode: Set up the user to access by card only, card or pin, card and pin…so on.
Guard User: Set up the particular user address to be as the Guard User, who only is a valid user to leave the event log in device but not allow opening the door.
Anti-pass-back: Enable/Disable the anti-pass-back function on device
2.Device Parameters (1) (2)
Node ID: Set up the Node ID of device
Show UID: To show the card no. in WG, ABA or HEX format
On/Off Open Zone: Enable/Disable the Open Zone function in device
Open Time Zone : Set up the zone of keeping the door opened after 1st card flashed on the device (NOT available yet)
Door Relay Tm: Set up the activated time of door relay
Alarm Relay Tm: Set up the activated time of alarm relay
Arming Delay Tm: Set up the delay time to activate the arming while event happened.
Arming pulse Tm: Set up the activated time of arming status
Auto Relock:
Egress (R.T.E): Enable/Disable to exit by the push button
3.Time-Attendance Setup
Enable/Disable Time-Attendance
Enable/Disable skip PIN check: to enable/disable the users to access by password, which mostly for the device without keypad/key-panel
Enable/Disable specific cards (such as guard card, clean card…ect.) to get access
Enable/Disable main controller and its WG reader to share the same relay door relay
Set up the time that a repeated card/tag can’t be read again on the same device
Set up the time of error input to lock the keypad / Key-panel
Enable/Disable the beep sounds while push button pressed
4.Tools
Language: Change the language
Master Code: Change the master code to login the programming mode/menu of device
Master Range: Set up a range of user cards can skip master code to login the programming mode/menu by flashed the card
Terminal Port: Select the connected terminal port to Lift Controller, Host Computer, LED Displayer or Printer.
Ext.Comm Port : Enable/Disable Lift Control Function
Clock Setting: Manual set up the YEAR / MONTH / DAY / HOUR / MIN. / SEC. / TIME FORMAT of device
5.Simply Control
Track 5 newly event logs on smart phone
Open door by smart phone
6.User login information management

Advanced Professional Function - SP-200-P (Free till Jan. 31st 2013)
1.Add->RF-learn: Add card/cards and register its/theirs card no. automatically by read card/cards on the device
2.Synchronize the parameters between device and cell phone
3.Synchronously backup and download 10 user card data into device
4.Edit / download the Alias to device
5.Advanced APP User login information management: Level Editable