Weave Craft Design

About Weave Craft Design Android App

Weaving is a form of weaving can be said that weaving is a way of weaving done in a simple way
Work Steps Make Simple Weaving
1 Determine the length and width of the tape to be made such measures are necessary to determine the length of the lungsi threads and the number of pieces of cardboard to be provided.
2 Provide wood and roll of feed yarn on the wood.
3 Provide the thread of lungsi between two spikes
4 Disconnect the four threads of lint thread on the non-rope hoop and then insert the lint threads into the first cardboard slot with the arrangement as planned after the four lint threads are inserted conclude the end with a live knot
5 Perform step four above until all the lint threads are inserted into the holes of the cardboard pieces
6 Arrange the pieces of cardboard with the holes already contained in the lint and concave the lint thread with a live knot.
7 Remove the limp strap strap from the tackle pin
8 Tie a tether to a table pole or anything that can be used to tether a strong enough file of lint thread.
9 Release the knot of the lint thread file and carefully pull the lint thread while trimming the string arrangement Then conclude with a dead node at the end tie the knot with a strong rope and tie the end to the belt worn by the weaver
10 weave two pieces of bamboo or small wood on the end of the thread of to spread the collection of lint threads
11 Hold the carton and slide arrangement so that it approaches the moored end of the belt and then grip it by hand and turn it forward or forwards so that there is a gap
12 Insert the small wood into the gap to do this step continuously so that the desired length of ribbon is achieved
And here are some sample images